Peak Pilates AFINA Owner's Manual And Assembly Manual page 23

Installing the Side Split Platform.
Fig. 28
Fig. 29
Twin Mat Conversion
The carriage can be flipped over to install either the springs or twin mats (for
exercises with the tower). Please follow the instructions below for using the twin
mats onto the reformer frame.
Fig. 30
Fig. 31
1. Place the foot bar so that it is resting
on the outside the frame.
2. Slide the nylon edges of the side split
platform into the metal brackets, with
the rounded edge facing inside the
frame (Fig. 28).
3. Ensure that the bottom of the side
split platform is touching the frame
(Fig. 29).
1. Unlock all springs from the gear bar.
2. Slide the carriage toward the head
end of the reformer frame.
3. Lift the carriage near the headrest
and fold it into the reformer frame.
4. Fold the foot bar into the frame so
that it rests on the flipped-over side
of the carriage (Fig. 30).
5. Place the mats on top of the
reformer frame, with the foot strap
set against the foot end of the frame
(the head is shown in Fig. 31).
23
PEAK PILATES
®