Indicators And Switches - Datamax Prodigy Operator's Manual

Label Material:
Thermal Transfer Ribbon:

Indicators and Switches

Indicator Lights:
Switches:
Communications Interfacing
Communications:
Character Set:
Word Length:
Handshaking:
Input Buffer:
Data is transmitted with no parity from the Printer.
________________________________________________________
__
Page - 8
Thermal transfer-plain coated papers, vinyl,
Mylar, metalized paper, nonwoven fabric,
fine woven fabric, thermal-visible light
scannable paper, infrared scannable paper,
thermal ticket/tag stock, thermally sensitive
plastic stock
Black or colored inks; 360 meters long, 4.6
microns, backcoated, ±10% label width
POWER, RIBBON/PAPER OUT, PAUSE
POWER, STOP/CANCEL, PAUSE, FEED,
TRANSFER ON, Rear configuration DIP
switch (SW1), and Darkness potentiometer.
IEEE RS-232C and RS-422 at 150, 300,
600, 1200, 2400, 4800, or 9600 baud
ANSI ASCII character set
Selectable 7 or 8 bit data format
XON/XOFF and CTS/DTR
15,359 bytes, XOFF is transmitted and DTR
goes low when 15,059 bytes are in the
buffer. XON is transmitted and DTR goes
high when 255 bytes are left in the buffer.
Product Description