12, 13, 14, 15
Column address. Must be 4 digits (0.01" step)
0000-0447
16,...
String data.
ASCII printable data for font selected.
Terminate with a <CR>.
^B Switch to string input commands:
Sn
n = String location. A-P.
4.8 Graphic Images
To enter the graphic image input routine, the Printer must be outside of
the LABEL INPUT command interpreter. The Printer must also receive
a STX character followed by an ASCII "I", a bank designation, an
optional word length modifier, a format designation, and up to an 8-
character string to identify the stored image data. The data that follows
is the image data.
If you use any of the 8-bit input formats, you must execute a "SOH D"
command before the GRAPHIC IMAGE INPUT. This command
disables the SYSTEM LEVEL command interpreter.
Iabfnnn...
a =
MEMORY MODULE BANK
A (1st 1/2), B (2nd 1/2), or C (16K+)
b =
(optional) A for 7-bit data, 8-bit if left out of command
f =
F for 7-bit IMG load file
I for .IMG 8-bit format (image will be flipped)
i for .IMG 8-bit format (save image as received)
P for .PCX 8-bit format (image will be flipped)
p for .PCX 8-bit format (save image as received)
n =
up to 8 characters for image name
________________________________________________________
__
Using the Printer
Select stored string from global table.
INPUT GRAPHICS DATA BLOCK
Page - 55
Need help?
Do you have a question about the Prodigy and is the answer not in the manual?