System Maintenance Screen - Datamax Prodigy Operator's Manual

5.6 System Maintenance Screen

The third screen, SYSTEM MAINTENANCE, is used to format and
copy memory modules, print test labels, and perform several other
maintenance functions.
Access the screen in the LABEL NAME position of the
CREATE/MODIFY LABEL or PRINT LABEL screens by keying in
ALT-S. This screen will appear:
1) FORMAT MODULE
2) COPY MODULE
3) METRIC? NO
4) PRINT TEST LABEL
5) SYSTEM TEST LABEL
6) TEST MODULE
7) RESET PRINTER
8) EXIT TO RS232 SYSTEM
ENTER NUMBER:
To exit the screen, press the ESC key. All SYSTEM MAINTENANCE
screen choices are explained below:
1. FORMAT MODULE. Used to initially format or to reformat a
memory module.
2. COPY MODULE. Copies graphic images and/or label formats from
one memory module to another. Be certain that the WRITE
PROTECT SWITCH is ON for the source module, and OFF for the
destination module. Follow the screen prompts to perform the copy
routine.
3. METRIC. Each time number 3 is pressed, the screen will toggle
between METRIC NO and METRIC YES. When in the METRIC
mode, all references to dimensions will be of METRIC measure.
________________________________________________________
__
Page - 98
SYSTEM MAINTENANCE
Using the Printer's Internal Labeling Software