Datamax Prodigy Operator's Manual page 103

Use the DEL or HOME key or the arrow keys to change any
information. Also, if the Printer does not allow you to enter as
many characters as you need, you may have to back up with the
arrow keys to allow more room on the label or change font size.
For special font "X", enter the required information. For special
font "Y", enter the name of the picture image you want to call
from the memory module for printing at this field position.
b. Enter the desired PROMPT information. The field allows up to
44 characters.
c. Enter the desired consecutive number fill character and
increment value. The field has this format: xnn . Use this chart
to specify the parameters:
x = fill character.
It can be any character, including a space. For example,
if * is used, all insignificant characters will be filled with
"*". If 0 is used, the field will fill with zeros.
nn... = increment value desired.
If 01, it will increment by ones (i.e. 1, 2, 3 etc.). If 02, it
will increment by twos (i.e. 1, 3, 5, 7 etc.). Can be any
value up to 99.
For example, an entry of 02 will print like this:
Once in the PRINT LABEL screen, the operator is prompted for
an initial increment or decrement value. The value entered is
the starting value for that run of labels. As a separate function,
an increment every "x" number of labels can be set in the
PRINT PARAMETERS screen (ALT-P).
________________________________________________________
__
Using the Printer's Internal Labeling Software
02
04
06
08
10
Page - 95