Using The Present Sensor Option - Datamax Prodigy Operator's Manual

3.12 Using the Present Sensor Option

With the addition of the PRESENT SENSOR option, the Printer can be
configured for "one up" printing mode. With the sensor installed and
enabled, the Printer will not print the next label in its internal buffer(s)
until the last label printed has been removed from the Printer.
Quantities of labels (printed one at a time) can still be requested by
remote computing devices.
S1-6 on the back of the Printer enables the sensor. The Printer must be
reset in order to read in the switch setting.
ENABLE SENSOR
DISABLE SENSOR
________________________________________________________
__
Page - 38
S1-6
ON
OFF
Setup and Self Test