Table of Contents
Advertisement
4. On the rear of the unit, turn the locking handle counterclockwise 90 degrees to lock the front
cover.
5. Re-install the rear cover, as described on page 9-6, after having performed all needed
operations.
Top Cover
Removal
Attention: If you try to remove the top cover without having performed this step, the machine
will stop automatically, and the file system integrity may be affected.
1. Do the steps listed in "Preliminary Operations" on page 9-2.
2. Before removing the top cover, be sure to remove the rear cover and the front cover. If you
have not, follow the removal procedures described in "Rear Cover" on page 9-4 and in
"Front Cover" on page 9-7.
9-10
Operator Guide
Later
Models
Early
Models
Advertisement
Table of Contents
