Table of Contents
Advertisement
diagnostics
loading, 7-2
stopping, 7-3
running, 7-2
SystemGuard
BUMP overview, 3-2
common tasks, 3-39
authorize the service console, 3-43
boot from network, 3-52
boot from SCSI device, 3-49
disable processors, 3-55
enable processors, 3-55
enable surveillance, 3-46
reboot AIX from remote service console, 3-48
set fast IPL, 3-40
set the electronic key, 3-39
set the service line speed, 3-42
set up console mirroring, 3-44
set up dial-out feature, 3-46
components, 3-2
console mirroring, 3-44
consoles, 3-4
dial-in phone numbers, modifying, B-5
dial-out authorization flag, modifying, B-4
dial-out phone numbers, modifying, B-5
electronic key, 3-4
electronic mode switch, modifying, B-6
flags, 3-9
flash EEPROM, reloading, B-7
maintenance menu, 3-21
disable service console, 3-25
display BUMP error log, 3-25
display configuration, 3-22
device level, 3-24
system level, 3-22
unit level, 3-22
enable service console, 3-25
off-line tests, 3-28
build test list, 3-29
execute test list, 3-32
modify/display test list, 3-31
power off, 3-25
reset, 3-25
set national language, 3-38
set parameters, 3-32
phone numbers, 3-34
power-on command parameters, 3-33
set configuration, 3-34
voltage margins, 3-33
system boot, 3-26
menus, 3-11
maintenance menu, 3-21
stand-by menu, 3-12
modem configuration, 3-47
modifying service support parameters, B-1
parameters, 3-9
phases, 3-4
boot, 3-5
init, 3-5
init to AIX load and run-time, 3-9
init to Boot, 3-9
Maint to Boot, 3-9
maintenance, 3-5
run-time, 3-5
stand-by, 3-4
stand-by to init, 3-6
physical key, 3-4
power, 3-2
remote authorization flag, modifying, B-3
remote operation configuration, C-1
service support parameters
changing flags and parameters, B-3
default values, B-1
stand-by menu, 3-12
display configuration, 3-13
I2C maintenance, 3-19
set configuration, 3-17
set flags, 3-15
set unit number, 3-16
SSbus maintenance, 3-18
test groups, A-1
descriptions, A-3
using, 3-1
working with, 3-10
SystemGuard parameters, modifying, B-1
T
tape cartridge
4mm
compatibility, 2-26
data capacity, 2-27
erasure, 2-27
loading 4.0G-byte tape drive, 2-30
setting the write-protect tab, 2-26
types, 2-25
unloading 4.0 G-byte tape drive, 2-31
8mm
environment considerations, 2-26
setting the write-protect tab, 2-17
tape drive
1/4-inch
cleaning, 2-38
loading, 2-35
unloading, 2-36
using, 2-33
4 mm
4.0 gigabyte, 2-28
X-7
Index
Advertisement
Table of Contents
