IBM 7013 J Series Operator's Manual page 30

Pair
GH
G,HHH
1-12
Operator Guide
Value Description
Serial port 1 connector.
S1
Serial port 2 connector.
S2
Serial Port 3 connector.
S3
Remote async node 1 on line 1.
11
Remote async node 2 on line 1.
12
Remote async node 3 on line 1.
13
Remote async node 4 on line 1.
14
Remote async node 1 on line 2.
21
Remote async node 2 on line 2.
22
Remote async node 3 on line 2.
23
Remote async node 4 on line 2.
24
Memory SIMM or DIMM in location 1 on the memory card.
01
Memory SIMM or DIMM in location 2 on the memory card.
02
Memory SIMM or DIMM in location 3 on the memory card.
03
Memory SIMM or DIMM in location 4 on the memory card.
04
Memory SIMM or DIMM in location 5 on the memory card.
05
Memory SIMM or DIMM in location 6 on the memory card.
06
Memory SIMM or DIMM in location 7 on the memory card.
07
Memory SIMM or DIMM in location 8 on the memory card.
08
For devices other than those listed here
00
Port addresses for 8-port async, 16-port async, and 16-port
00
concentrator distribution boxes.
thru
15
Diskette drive 1
01
SCSI address and logical unit number of the device shown in
0,000
decimal.
thru
Note: When a comma appears between the G and H, digits
F,255
appearing to the right of the comma are represented in decimal.