Anti Code / Engineer Restore Facility; Anti-Code; Engineer Reset - Pyronix Enforcer 32-W User Manual

9 . A n t i C o d e / E n g i n e e r R e s t o r e F a c i l i t y

9.1 Anti-Code

Your Engineer may have set up the system so that either an 'Anti-Code' or 'Engineer Restore' is
required in order to fully reset the wireless alarm system (your code will still silence the alarm,
but it will not reset the system).
After alarm activation has occurred,
enter a valid PIN code, or preset a valid

tag, or press
the alarm.
The keypad will display as shown to the
right.
Take note of the number, on the screen
and call your Alarm Receiving Centre
(ARC).
Press I.
When the time is displayed, enter the
number given to you by the ARC.
'Engineer Restore Performed' will be
displayed.
Press A .

9.2 Engineer Reset

When the time is displayed, enter the
Engineer code.
'Engineer Reset Performed' will be
displayed.
Press A.
on the keyfob to silence
User Manual
Page: 12