Engineer Contacts And Tables; Engineer Information; Intruder Alarm Signal; Tamper Alarm Signal - Pyronix Enforcer 32-W User Manual

1 5 . E n g i n e e r C o n t a c t s a n d T a b l e s

15.1 Engineer Information

Alarm Company
Date of Installation
Site Reference
Engineer Name
Engineer Contact Number
Installed to Grade
Environmental Class
Your panel is suitable for use in installations designed to meet the European requirements of
Security Grade 2, Environmental Class 2. When all parts are working normally, this equipment
in combination with the PSTN or GSM and suitable ARC equipment will meet the requirements of
ATS2.
External set/unset readers and wireless sirens meet the requirements of environmental class 4.
Number of Code Differs: tag hex code.
Your panel is designed to automatically inhibit certain functionality. The factory default settings
are shown below:

15.1.1 Intruder Alarm Signal

After 3* unconfirmed alarms in the same area or 1 confirmed alarm. * This figure is
programmable by the Engineer.

15.1.2 Tamper Alarm Signal

After 3* unconfirmed alarms in the same area or 1 confirmed alarm. * This figure is
programmable by the Engineer.

15.1.3 Keypad

After 30 key presses without entering a valid code, keys are disabled for 90 seconds. After
reinstatement, this will be repeated after each 7 key presses until a valid code is entered.

15.1.4 Tag Reader (Or Tag at a keypad)

After 6 presentations of an invalid tag, the reader will be disabled for 90 seconds. After
reinstatement, this will be repeated for each invalid tag until a valid tag is used.

15.2 Certification

All Wireless devices comply with the following EU requirements:
EMC Directive
Low Voltage Directive
R&TTE Directive
And meet the following standards where relevant:
EN 61000-6-3:2007
+A1:2011
EN 50130-4:2011
EN 60950-1:2006
+A12:2012
EN 50131-5-3:2005+
A1:2008
ETSI EN 301489-
3:2000
ETSI EN 300 220
CEPT/ERC
Compliant operation is only guaranteed when installed and operated according to the relevant
installation and user manuals.
User Manual
II
2004/108/EC
2006/95/EC
1999/5/EC
EMC. Generic emission standard. Residential, commercial and light
industry
Immunity requirements for components of fire, intruder and social
Information technology equipment. Safety. General requirements
Grade 2. Interconnections for equipment using radio frequency
techniques
EMC. Radio equipment. Part 3: Short range devices (SRD) 9kHz to
40GHz
EMC. Receiver Class 1, Environmental Category 1
Recommendation 70-03 Annex 1
Page: 24