Unsetting After An Alarm; Using A Pin Code Or Tag; Using A Wireless Keyfob (Kf4-We) - Pyronix Enforcer 32-W User Manual

7 . U n s e t t i n g a f t e r a n a l a r m

7.1 Using a PIN Code or Tag

Enter a valid PIN code or present a valid
tag to the symbol as shown.
The alarm symbol will flash indicating
there has been an alarm activation and
the keypad will display which input has
activated.
Press A to reset the system.

7.2 Using a Wireless Keyfob (KF4-WE)

NOTE: Unsetting with a keyfob will only
be allowed if your engineer has enabled
this.
To unset via a keyfob. Press
The keyfob LED will start to flash GREEN
indicating that the system has unset.
Resetting the system after an alarm can
only be done at the keypad.
User Manual

.
Page: 10