Setting The System; Using A Pin Code Or Tag; Using The Wireless Keyfob (Kf4-We) - Pyronix Enforcer 32-W User Manual

5 . S e t t i n g T h e S y s t e m

5.1 Using a PIN Code or Tag

Enter a valid PIN code or present a valid
tag to the symbol as shown.
Enter the area you wish to set, and press
I. 'Please wait setting wireless' will be
displayed.
There are three different setting
methods your installer will instruct you
through:
Final Door: Leave the building and
make sure the exit door is closed
properly.
Timed: Make sure you leave the building
before the timer shown on the keypad
expires.
Push to set: Press the push to set
button installed by your engineer to set
the system.

5.2 Using the Wireless KEyfob (KF4-WE)

To set via a keyfob. Press
than 2 seconds.
The keyfob LED will start to flash GREEN
indicating that the system is starting to set.
'Please wait setting wireless' will be displayed
on the keypad and the programmed area will
begin to set.
To 'quick set', press and hold the
time for 4 seconds.
Once set, the keyfob LED will illuminate RED
indicating that the system is now set.
User Manual

and hold for more

key a second
Page: 8