Yamaha RX-V563 Owner's Manual page 82

Remote control features
• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step 2, the
setup process is canceled. If this happens, repeat the setup
procedure.
POWER
~
Press for 3
seconds
..
~
XII SIRIUS
D O 0
000
Q,DQL
Sh
000
While holding down
2
Press the numeric buttons (0 to 9) (@) to
enter the four-digit remote control code for
the component to be used.
When the setting succeeds, "RemoteSetup OK"
appears; however, when it does not, "RemoteSetup
NG" appears in the front panel display.
1
While pressing and holding one of the input
selector buttons (@) on the remote control to
select the input area you want to set up,
press ®AV
POWER
for more than 3
seconds.
CD
CD YAMAHA 5013
MD/CD-R CD-R YAMAHA 5001
TUNER TUNER YAMAHA
5007
DVD DVD YAMAHA 2000
DTV/CBL
V-AUX
TUNER YAMAHA SOil
DVR DVR YAMAHA 2011
XM TUNER YAMAHA
5009
SIRIUS TUNER YAMAHA 5017
A TUNER YAMAHA 5012
B TUNER YAMAHA 5009
C TUNER YAMAHA 5017
,t~gt!4
You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above. In this case,
try setting another Yamaha remote control code.
Remote control code default settings
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to "List of remote
control codes" at the end of this manual.
78
En