Selecting the SCENE templates
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 17 SCENE
templates to create the original SCENE templates.
3
Press ®AMP and then ®t:,
I
' V
to select the
desired parameter of the SCENE template
and then @<J
I
[>
to select the desired value
of the selected parameter.
You can adjust the following parameters for a SCENE
template:
•
Customizing the preset SCENE
templates
Use this feature to customize the preset SCENE templates.
• NIGHT:
The input source component
The active sound field programs,
STRAIGHT or DIRECT mode (see
pages 41 and 43)
The night listening mode setting (see
page 44)
- SYSTEM: Keeps the current night listening
mode.
- CINEMA: Sets the night listening mode to the
CINEMA mode.
- MUSIC:
Sets the night listening mode to the
MUSIC mode.
• INPUT:
• MODE:
4
Press the ®SCENE button again to confirm
the edit.
Assign to the SCENE
button
Create the original SCENE
template
Select a SCENE template
1
Turn on the video monitor connected to this
unit.
An asterisk mark
(*)
appears by the name of the original SCENE
template.
2
Press and hold the desired ®SCENE button
for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
..
3 seconds
• Once the desired SCENE templates are assigned to the
corresponding ®SCENE buttons, you may need to set the
input source of the SCENE template on the remote control. See
page 34 for details.
• You can create a customized SCENE template for each
®SCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized
SCENE template with the new one.
• The newly created template is only available for the assigned
®SCENE button.
•
Renaming the SCENE templates
When the SCENE template you want to customize is not
assigned to any of the ®SCENE buttons, press ®AMP
and then press ®<ll
[>
repeatedly to recall the desired
SCENE template on the menu screen.
Select the name of the SCENE template at step 3
of "Customizing the preset SCENE templates"
and then press @ENTER.
• Press
@t:, /
' V
to select the desired character.
• Press @<J /
[>
to place "_" (underscore) under the
space or the desired character.
• Press @RETURN to cancel the new name.
• Press
®
ENTER to confirm the new name.
•
33
En