Yamaha RX-V563 Owner's Manual page 11

Quick start gUide
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set "SP IMP." to
"60 MIN" before using this unit (see page 23).
1
Turn on the video monitor and then set the
input source selector of the video monitor to
this unit.
• About SCENE function
Just by pressing one SCENE button, you can tum on this
unit and recall your favorite input source and sound field
program according to the SCENE template that has been
assigned to the SCENE button. The SCENE templates are
built combinations of input sources and sound field
programs.
If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
component and start playback. Refer to the instruction manual of
the DVD player for further information.
2
Press (f)SCENE 1.
This unit is turned on. "DVD Viewing" appears in the
front panel display, and this unit automatically
optimize own status for the DVD playback.
Start playback of the desired DVD on your
player.
Default The name of the SCENE template
SCENE and its description
button
SCENE DVDViewing
1
- input source: DVD
- sound field program: STRAIGHT
For when you want to enjoy a DVD playback.
SCENE Disc Listening
2
- input source: DVD
- sound field program: 7ch Stereo
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.
SCENE TV Viewing
*1
3
- input source: DTV
ICBL
- sound field program: STRAIGHT
For when you want to watch a TV program.
SCENE
Radio Listening
*2. *3. *4
4
- input source: TUNER
- sound field program: 7ch Enhancer
For when you want to listen to a music program
from the FM radio station.
• Using the other SCENE buttons
@
--
@
--
o
C
- - J
~
.
..::
'"
~<i>~
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
3
When you change the input source or sound field program, the
SCENE mode is deactivated, and the indicator on the selected
SCENE button turns off.
4
Rotate
©
VOLUME to adjust the volume.
-
@
--
=
-
-
-'"
-
...
--
~
0
@
*1
You must connect a cable TV or a satellite tuner to this unit in
advance. See page 18 for details.
*2
You need to connect the supplied FM and AM antennas to this
unit in advance. See page 21 for details.
*3
You must tune into the desired radio station. See pages 45 to 47
for the tuning information.
*4
To achieve the best possible reception, orient the connected
AM loop antenna, or adjust the position of the end of the
indoor FM antenna.
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 30 for details.
I
7
En