Yamaha RX-V563 Owner's Manual page 74

SET MENU
• HDMI set H)HDt1I SET
Use this feature to select the component to play back
HDMI audio signals.
• Extended surround I) E)<TD SUR.
1 SOUflD
MEf~U
1
SOUfm
~1Ef~U
J)EXTD SUR.
.. >flUTO LflST
EXTD SUR.······flUTO
H)HDMI SET
SUPPORT flUDIO:
RX-U563
[-<lJ/[..J:Select
[EHTERJ:Relurn
Support audio
S. f:lUD I 0
Use this feature to select whether to play back HDMI
audio signals on this unit or on another HDMI component
connected to the HDMI OUT jack on the rear panel of this
unit.
Extended decoder select mode
Use this feature to designate the extended decoder mode
for the input sources connected to the DIGITAL INPUT
jacks when you turn on the power of this unit.
Choices: AUTO, LAST
• Select "AUTO" if you want this unit to automatically
detect the digital audio input signal and activate the
appropriate decoder.
• Select "LAST' if you want this unit to automatically
select the last decoder mode set for "EXTD SUR.".
Extended decoder specifying
Use this feature to enjoy 6. 117. I-channel playback for
multi-channel sources using the Dolby Pro Logic IIx,
Dolby Digital EX, or DTS-ES decoders by using the
connected surround back speakers.
Plays back HDMI audio signals on another
HDM! component connected to the HDMI OUT
jack.
Plays back HDM! audio signals on this unit. The
HDM! audio signals input at the HDM! input
jacks of this unit are not output to the HDMI
component connected to the HDMI OUT jack on
the rear panel of this unit.
Other'
R::·~-I.J563
PL I I xt1us
i
C Plays back Dolby Digital or DTS signals in
6.ln.1 channels using the Pro Logic I1x
music decoder.
• This unit transmits audio and video signals input at the HDMI
input jacks to the HDMI out jack only when this unit is turned
on even if "SUPPORT AUDIO" is set to "Other".
• Available audio/video signals depend on the specification of the
connected video monitor. Refer to the instruction manual of
each connected component.
f:lUTO
PLII::-::t1ol.)ie
(when 2 surround
speakers are
used.)
Activates the optimum decoder to play back
signals in 6.ln.1 channels when this unit
recognizes a signal flag being input.
Plays back Dolby Digital or DTS signals in
7.1 channels using the Pro Logic I1x movie
decoder.
E>~/ES
Plays back Dolby Digital or DTS signals in
6.ln.1 channels using the Dolby Digital EX
or DTS-ES decoder.
OFF
Does not use any decoders to create 6.ln.1
channels.
70
En