Yamaha RX-V563 Owner's Manual page 32

OptimIZIng the speaker setting for your listening room
The display changes as follows.
RUTO SETUP
SETUP·······RUTO
.. STRRT
RutoMaUc
Processing
of all iteM
[a]/["']: Up/Down
[EfITER]: Start
t
RUTO SETUP
nlITIRLIZING
..
I~
IRI NG/LEVEL
DISTRNCE
SIZE
I~RITH'G· ••
[a]:Exit
t
RUTO SETUP
RESULT
SP: 3/2/13.1
DIST: 3.2/3. 5M
LVL: -2/+2dB
.. )SET CRNCEL
[a]
/[T]:
Up/Down
[ENTER]:Enter
The results displayed under "RESULT' are as follows.
Number of speakers
SP
Displays the number of speakers connected to this unit in
the following order:
Front/BacklSubwoofer
Speaker distance
D1ST
Displays the speaker distance from the listening position
in the following order:
Closest speaker distancelFarthest speaker distance
Speaker level
UJL
Displays the speaker output level in the following order:
Lowest speaker output level/Highest speaker output level
• If "E-9:INTERNAL ERROR" appears during the testing
procedure, restart from step 4.
• If you selected "RELOAD" in step 4, no test tones are output.
• If an error occurs during the "AUTO SETUP" procedure, the
setup procedure is canceled and an error screen appears. For
details, see "If an error screen appears" on page 29.
• When this unit detects potential problems during the "AUTO
SETUP" procedure, "WARNING" and the number of warning
messages appears (see page 29).
28
En
7
Press @/::,. and @ENTER to display the
setup results in detail.
8
Press @<J
I
[>
repeatedly to toggle between
the setup result displays.
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the speaker
size
Results of the speaker
output level
~\~/~
If you are not satisfied with the results or want to manually
adjust each parameter, run "MANUAL SETUP" (see
page 63).
The distances displayed in the "DISTANCE" results may be
longer than the actual distance depending on the
characteristics of your speakers.
9
Press @ENTER to return to the result
display.
RUTO:RESULT
.. RESULT
SP: 3/2/13.1
DIST: 3.2/3.5M
LVL: -2/+2dB
)SET CRNCEL
[a]/[T]:
Up/Down
[ENTER]:Detail