Yamaha RX-V563 Owner's Manual page 46

Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports,
Movie Spacious and Movie Dramatic:
DSP level DSP
LEI.JEL
Function: Adjusts the effect level.
Choices: MIN, MID, MAX
For 2ch Enhancer and 7ch Enhancer:
For Pro Logic II Music and Pro Logic IIx Music:
Panorama
PH~'~ORHt1H
Function: Sends stereo signals to the surround
speakers as well as the front speakers for
a wraparound effect.
Choices: OFF, ON
Dimension
Dlt1E~·6IOt·~
Function: Gradually adjusts the sound field either
towards the front or towards the rear.
Control range: -3 (towards the rear) to +3 (towards the
front), initial setting is SID (standard).
Center width
CT I.HDTH
Function: Adjusts the center image from all three
front speakers to varying degrees. A
larger value adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
For Neo:6 Music
Center image
C. I t1H13E
Function: Adjusts the front left and right channel
output relative to the center channel
more or less dominant as necessary.
Control range: 0.0 to 1.0, initial setting is 0.3.
Sound field programs
• Editing sound fields parameters
You can enjoy good quality sound with the factory default
parameters. Although you do not have to change the initial
settings. you can change some of the parameters to better
suit the input source or your listening room.
1
While listening to a source, press
®AMP
and then press
~PARAMETER.
2 .
Press @/1/
' V
to select the desired parameter
you want to change.
3
Press @<J /1>
to change the parameter
value.
You cannot change parameter values when "MEMORY GUARD"
in "OPTION MENU" is set to "ON" (see page 74).
42
En
Effect level
Function:
Choices:
EFFECT LEI.JEL
Adjusts the effect level.
LOW,HIGH