Yamaha RX-V563 Owner's Manual page 15

Connections
Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty,
this unit cannot reproduce the input sources accurately.
Caution
• Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet.
• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage
this unit and/or the speakers. If the speaker wires are short-circuited, "CHECK SP WIRES" appears in the front
panel display when you tum on this unit.
• Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the
speakers away from the monitor.
• If you are to use 6 ohm speakers, be sure to set "SP IMP." to "6Q MIN" before using this unit. For details about the
speaker impedance setting, see page 23.
When you use single surround
back speaker, connect the
speaker to the left SURROUND
BACK terminal (SINGLE).
Surround back speakers
Right Left
Surround speakers
Right Left
FRONT B terminals
Connect the alternative front speaker system
(FRONT B).
Subwoofer
Right Left
Front speakers
(FRONT A)
11
En
•