Yamaha RX-V563 Owner's Manual page 68

SET MENU
Option menu 3 OPT I Ot·j t1Et·jU
i=l:> DI SPLi=l'/ SET
B) t1Et10R'/ I3Ui=lRD
C)i=lUDlO SELECT
D:> Pi=lRi=lt1. I t·jl
E)BLUETOOTH SET
F)::-~t1 Ri=lDlO SET
(3)SlRIUS SET
Adjusts the brightness of the front panel display and the way in which the XM and iPod
infonnation is displayed.
Locks sound field program parameters and other "SET MENU" settings.
Designates the default audio input jack select setting for the input sources connected to the
DIGITAL INPUT jacks when you tum on the power of this unit.
Initializes the parameters of a group of sound field programs.
Pair the connected Yamaha Bluetooth adapter (such as YBA-tO, sold separately) with a
Bluetooth component (see page 61).
Displays the current reception level of the XM Satellite Radio signals.
Sets the SIRIUS Parental Lock code number and the channel lock configuration (see
page 56).
73
74
74
74
75
75
75
fJ~~l
The "XM RADIO SET' and "SIRIUS SET" parameters are only applicable to the U.S.A. and Canada models.
• Signal information SlGt·ji=lL HlFO
Use this feature to check audio signal information (see page 38).
Use the remote control to access and adjust each
parameter.
You can change the "SET MENU" parameters while this unit is
reproducing sound.
1
Press @AMP and then press @MENU to
enter "SET MENU".
The top "SET MENU" display appears in the OSD.
SET MENU
TOP MENU
.. ·~UTO SETUP
• t'l~NU~L SETUP
·SIGN~L
INFO
[ ...]dT]: Up/Down
[ENTER]: Enter
2
Press
@!J.I
' V
to select "MANUAL SETUP".
SET t'lENU
TOP t'lEflU
·RUTO SETUP
.. • t'lRfIURL SETUP
• SIGflRL HIFO
["']/[T]: Up/Dmm
[ENTER]: Ente,-
64
En
3
Press @ENTER to enter "MANUAL SETUP".
The "MANUAL SETUP" display appears in the
OSD.
• M~fIU~L SETUP
.. 1 SOUND MENU
2 HlPUT t'1ENU
3 OPT! ON t'1EflU
["']/[T]:Up/Down
[EfHER] : Enter
4
Press
@!J.I
' V
1<11
c> and @ENTER to select
and change the parameter.
• Press
@!J. /
' V
to select the desired menu or
parameter.
• Press
@<1 /
C>
to change the parameter value.
• Press @ENTER to enter the selected menu or to
confirm the parameter.
• Press @RETURN to return to the previous menu
level.
5
Press @MENU to exit from "SET MENU".