Yamaha RX-V563 Owner's Manual page 20

Connections
Conn~a~i"g~lif'tJ;~qmi{o;'~Dt.,;,
,:':;;::,.., -ie"., , .-r'''';xi·'_~_
..'..
4.'.
<' ,: .
",,--,:.,?":(;.,.-,,- : . . . :,.,:._"...r;~:"j+,.>
W'-
'&< • .<: ..... !'..
@.
~:;M
. • ,
Connect your TV (or projector) to the HDMI OUT jack,
the COMPONENT VIDEO MONITOR OUT jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR
OUT jack of this unit.
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
You can choose to play back HOMI audio signals on this unit or
on another HOMI component connected to the HOMI OUT jack
of this unit. Use the "SUPPORT AUDIO" parameter in "SOUNO
MENU" to select the component to play back HOMI audio
signals (see page 70).
TV (or projector)
indicates recommended connections
indicates alternative connections
(One for the video connection,
and one for the audio connection)
16
En
• Some video monitors connected to this unit via a OVI
connection fail to recognize the HOM I audio/video signals
being input if they are in the standby mode. In this case, the
HOMI indicator flashes irregularly.
• When you connect your TV monitor or projector via HOM I
connection, the OSO does not appear. In such cases, connect the
TV monitor or projector via component, S-video or video
connection.
• Connect the input source components to the HOMIIN OVO or
HOMI IN OTV/CBL jack to display the video images on the
video monitor connected to the HOMI OUT jack.