Yamaha RX-V563 Owner's Manual page 21

Connections
Nqteil
• When "VIDEO CONV:' is set to "OFF" (see page 73), be sure
to make the same type of video connections as those made for
your TV (see page 16). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit, connect your
other components to the VIDEO jacks.
Make sure that this unit and other
components are unplugged from the
AC wal1 outlets.
• Connecting a DVD player
• When "VIDEO CONV." is set to "ON" (see page 73), the
converted video signals are output only at the MONITOR OUT
jacks. To record a source, make the same type of video
connections between each component.
• To make a digital connection to a component other than the
default component assigned to DIGITAL INPUT jack, select
the corresponding setting for "OPTICAL IN" or "COAXIAL
IN" in "INPUT ASSIGNMENT" (see page 71).
• If you connect your DVD player to both the DIGITAL INPUT
(OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks,
priority is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
DVD player
;I>
C
Q.
o·
o
g
c
I •
I I I
,--~._-~
s
indicates recommended connections
indicates alternative connections
• • • • •• •• (One for the video connection,
and one for the audio connection)
17
En
•