Yamaha RX-V563 Owner's Manual page 59

Before performing the following operations, press
@SIRIUS.
• All Channel Search mode
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select" ALL CH
SEARCH".
2
Press @PRESETITUNING/CH <]/
C>
(or
@PRESET/CH
b./ '\I)
repeatedly to search
for a channel within all channels.
• You can search for a channel quickly by pressing and holding
@PRESETITUNINGICH
<] /
I>
(or@PRESET/CH6.1'1).
• You can skip channels to the previous or next category by
pressing ®CATEGORY (or@A-ElCAT.
<] /
1».
• Category Search mode
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "CAT SEARCH".
2
Press ®CATEGORY (or @A-E/CAT. <]/
C»
repeatedly to change the channel category.
3
Press @PRESETITUNING/CH <]/
C>
(or
@PRESET/CH
b./ '\I)
repeatedly to search
for a channel within the selected channel
category.
~'¥~
You can search for a channel quickly by pressing and holding
@PRESETITUNINGICH
<] /
I> (or @PRESET/CH
6. /
'1).
''Rbi.,
,', ·.,::,_'i,~i;..;,;,>:;m
This unit skips the channels when this unit is All Channel Search
mode or Category Search mode in the following cases (it is not
malfunction of this unit):
- the channel is locked (see page 56).
- the channel is out of service.
- you do not subscribe to the channel.
SIRIUS Satellite Radio
1M
tuning
• Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset SIRIUS channels. For details, see
"Setting the SIRIUS Satellite Radio™ preset channels" on
page 56.
1
Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "PRESET
SEARCH".
2
Press ®CATEGORY (or @A-E/CAT. <]/
c»
repeatedly to change the preset channel
group (A to E).
3
Press @PRESETITUNING/CH <]/
C>
(or
@PRESET/CH
b./ '\I)
repeatedly to change
the preset channel number (1 to 8).
,I,
:"':.
You can also select the preset channel number directly by
pressing the numeric buttons (I to 8)
(@).
• Direct Number Access mode
1
Press @SRCH MODE on the remote control
repeatedly to select"ALL CH SEARCH" or
"CAT SEARCH".
2
Press the numeric buttons (@) to enter the
desired three-digit channel number.
For example, to enter the number 123, press the
numeric buttons (@) as shown below.
,I,
:<il:'
• To display the SIRIUS Radio ID (SID) number displayed in the
front panel display, select channel "0".
• To enter a one-digit or two-digit channel number, press the
numeric buttons
(@)
on the remote control and then press
<9ENT to confirm the input number.
• Instead of pressing <9ENT to tune into the channel
immediately, you can wait a few seconds until this unit confirms
the entered channel number.
• Pressing a button other than the numeric buttons (@) or
~ENT
cancels the Direct Number Access mode procedure.
• If the selected channel is locked, "PIN:_ _" appears in the
front panel display. Enter the four-digit Parental Lock code
number by using the numeric buttons (@) or press <9ENT to
cancel.
55
En
•