Yamaha RX-V563 Owner's Manual page 73

• Dynamic range F:>D'·n~At1IC
f':At¥:iE
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when this unit is
decoding Dolby Digital and DTS signals.
1 SOUND MENU
F)DVNi=lMIC
Ri=I~IGE
~
SPEi=lKER······Mi=lX
HEi=lDPHONE····Mi=lX
Speaker
SPEAKER
Adjusts the speaker compression.
Headphone
HEADPHot'~E
Adjusts the headphone compression.
Choices: MIN, SID, MAX
• Select "MIN" (minimum) if you regularly listen at low
volume levels.
• Select "SID" (standard) for general use.
• Select "MAX" (maximum) to preserve the greatest
amount of dynamic range.
• Audio settings 13:> AUD I 0 SET
Use this feature to adjust the overall audio settings of this
unit.
1 SOUND t'lENU
G)i=lUDIO SET
~
MUTE T'lPE .. •FULL
i=I.DELi=lV······0Ms
Mi=lX UOL.···+16dB
INIT.UOL.····OFF
[A]/[T]:
Up/Do'Jn
[-tl]/["']:Select
Mute type
t'1UTE
r . . . .
PE
Use this feature to adjust how much the mute function
reduces the output volume (see page 37).
Choices: FULL, -2OdB
• Select "FULL" to completely mute all the audio
output.
• Select "-20dB" to reduce the current volume by 20 dB.
Audio delay
A. DELi=I.... '
Use this feature to delay the sound output and synchronize
it with the video image. This may be necessary when
using certain LCD monitors or projectors.
Control range: 0 to 160 ms
Control step: I ms
SET MENU
Maximum volume
t' 1 A::< I')OL.
Use this feature to set the maximum volume level. This
feature is useful to avoid the unexpected loud sound by
mistake. For example, the original volume range is
+
16 dB
to -80 dB. However, when "MAX VOL." is set to -5 dB,
the volume range becomes -5 dB to -80 dB.
Control range: +16 dB, +10 dB to -30 dB
Control step: 5 dB
The "MAX YOL." setting takes priority over the "Initial Yolume"
setting. For example, if "INIT.YOL." is set to -20 dB and "MAX
YOL." is set to -30 dB, the volume level is automatically set to
-30 dB when you tum on the power of this unit next time.
Initial volume
I t,~ IT. UOL.
Use this feature to set the volume level when the power of
this unit is turned on.
Choices: Off, MUTE, -80 dB to
+
16 dB
Control step: I dB
'N)'tli
.....•1.:". . . [ ,
The "MAX YOL." setting takes priority over the "INIT.YOL."
setting.
69
En
•