Yamaha RX-V563 Owner's Manual page 38

Selecting the SCENE templates
• Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 78).
1
Press the desired @SCENE button on the
remote control.
2
Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
• Setting input source of the customized
SCENE template on the remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
Press and hold the @SCENE button and the
desired input selector button (@) for 3 seconds.
,1,
~"'~
Press the
®SCENE
button again to operate the input source
component.
*
SCENE buttons
• These buttons control the input source component. See page 77
for details of the function of each button.
34
En