Yamaha RX-V563 Owner's Manual page 71

SET MENU
• Speaker level 8) SP LEI,JEL
Use this feature to manually adjust the output level of each
speaker.
Control range: -10 to
+
10 dB
Control step: I dB
Initial setting: 0 dB
Crossover CROSSOI,JER
Use this feature to select the crossover frequency of all the
speakers set to "SML" (or "SMALL") in "SPEAKER
SET' (see page 65). All frequencies below the selected
frequency will be sent to the subwoofer or front speakers
depending on the setting of "LFFlBASS OUT' in
"SPEAKER SET' (see page 65).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz,
110Hz,
120Hz, 160Hz, 200Hz
1
SOUND MENU
A)SPEAKER SET
~
1 SOUND MENU
B)SP LEVEL
1/2
-----------+
.. FR.L--t1--
FR. R----ll-
CNTR----ll-
SWFR----ll-
1.11
1
SOUND r1ENU
B)SP LEVEL
2/2
~5UR.L----I-----+
SUR.R
I
SBL
n
SBR _ . t 1 -
1.1 i
FREQ···80Hz
Subwoofer phase
SU81.JOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
1 SOUND MENU
A)SPEAKER SET
s~
)NORMAL REVERSE
• Select "NORMAL" if you do not want to reverse the
phase of your subwoofer.
• Select "REVERSE" to reverse the phase of your
subwoofer.
FR.L
Front left speaker
FR.R
Front right speaker
CtHR
Center speaker
SI.JFR
Subwoofer
SUR.L
Surround left speaker
SUR.R
Surround right speaker
S8L
Surround back left speaker
58R
Surround back right speaker
• The available speaker channels differ depending on the selling
of the speakers.
• Instead of "SBL" and "SBR", "SUR.B" is displayed if "SUR.S
LIR SP" is set to either "SMLx." or "LRGx." (see page 66).
67
En
•