2.7 Paper Pickup Roller
Using lint-free paper dipped in isopropyl alcohol, wipe and dirt off the paper pickup roller.
2.8 Transfer Charging Roller
Wipe with lint-free paper and remove any toner or paper debris.
Do not touch or hold the sponge section of the transfer charging roller. Doing so can cause
marks on back of paper or blank spots in copied or received images.
Do not use solvents.
Replace the charging roller if it is deformed or cannot be thoroughly cleared using lint-free
paper.
2.9 Static Charge Eliminator
Wipe with a lint-free paper and remove any foreign matter, such as paper fragments.
2.10 High Voltage Terminal
Wipe with a clean, soft, dry, lint-free cloth to remove any toner or paper debris.
2.11 Fixing Entrance Guide
Wipe with a lint-free paper and remove any toner or paper debris.
2.12 Paper Eject Face-up Roller
Using lint-free paper dipped in isopropyl alcohol, wipe off the paper eject face-up roller.
2.13 Flapper
Wipe with a lint-free paper and remove any toner or paper debris.
2.14 Document Feed Roller, Document Eject Roller
Wipe with a soft, dry clean cloth.
2.15 Pressure Roller
Using lint-free paper dipped in isopropyl alcohol, wipe off the pressure roller.
2.16 Fixing Ass'y
Using lint-free paper dipped in isopropyl alcohol, wipe off the fixing ass'y.
2.17 Separation Pad
Using cloth dipped in isopropyl alcohol, wipe off the separation pad.
LASER CLASS 1060P Chapter 4: Maintenance & Service
4-5