Troubleshooting - CanyCom CG431 Operator's Manual

Troubleshooting

• If any malfunction or abnormal condition is found, immediately stop using the
machine and take an appropriate measure according to the Troubleshooting chart
below. If the malfunction or abnormal condition is not listed in the chart, or the
suggested measure does not solve the problem, consult with your CANYCOM
representative.
• Some corrective measures listed below require special knowledge and/or
equipment. Please contact your CANYCOM representative in such a case.
Area
Engine does not start,
or is difficult to start
Engine
Engine stalls.
Engine stops abruptly.
Idling is not stable.
Troubleshooting
Malfunction
Out of fuel.
Air in fuel line.
Water in fuel system
Insufficient battery
capacity
Insufficient or wrong
oil.
Other (other than the
above).
Out of fuel.
Air in fuel line.
Cold engine.
Other (other than the
above).
Out of fuel
Other (other than the
above).
Insufficient intake air
(clogged air cleaner).
Other (other than the
above).
Possible Cause
→Fill fuel.
→Bleed fuel line.
→Drain water.
→Add battery fluid.
→Charge battery.
→Replace battery.
→Fill or change oil.
→Follow the
→Fill fuel.
→Bleed fuel line.
→Warm up engine.
→Please contact
→Fill fuel.
→Please contact
→Clean or replace the
→Please contact
-71-
Corrective Measure
instructions in
"Starting" to restart.
If problem persists,
please contact
your CANYCOM
representative.
your CANYCOM
representative.
your CANYCOM
representative.
air cleaner.
your CANYCOM
representative.
6
Ref.
Page 16
Page 52
Page 52
Page 62
Page 45
Page 18
Page 16
Page 52
Page 16
Page 50