CanyCom CG431 Operator's Manual page 28

• Do not use this product in dusty places such as desert. Dust may clog air
cleaner or enter engine, which may reslt in loss of performance and an
accident. It also causes excessive wear.
• Do not use this machine in the altitude above 1500m (4921ft) in its original
configuration. This machine cannot perform adequately above that altitude.
Using this machine under such conditions may result in an accident or cause
damage to the machine. If you need to use this machine above that altitude,
contact your CANYCOM representative.
Parking Brake Switch
Parking Brake
Implement Aux. Transmission
Direction Switch
HI
Drive
Normal
Reverse LO
5116M-0402-010E
Implement Switch
Press and turn
Implement Switch
Stop
Push to stop
5116M-0402-021E
Operation
Main Switch
Imp
Tra
Cen
Start
1. Parking Brake
2. Imprement Switch
STOP
3. Safety Switch "ON"
4. Start Engine
Automatic
On
1. Make sure parking brake switch is in
[ (Parking)] position.
2. Make sure implement switch is in Stop
position.
-19-
4