Greasing - CanyCom CG431 Operator's Manual

5
NOTE
• Fluid capacity and grade: Page 39.
Drain Plug
5116M-0508-040E
Drain Plug
5116M-0508-050E

Greasing

• Follow the maintenance schedule to grease up machine. Lack of greasing may
result in rust, excessive wear or seizure.
NOTE
• When using a manual grease gun, pump 5-6 times. When the handle of the gun
becomes heavy, stop pumping immediately.
• When using a pneumatic grease gun, pump it for a few seconds.
• Grease to use: Page 39
Maintenance
1.
2.
3.
4.
5.
6.
7.
Oil Level Plug
-60-
Park machine so that drain plug on drive
motor is in the lowest position.
Have an appropriate drain pan.
Remove drain plug to drain lubricant.
Move machine so that drain hole is placed
avobe check plug.
Remove check plug.
Fill sprcified lubricant into drain hole until it
flows out of check hole.
Replace drain and check plugs.