CanyCom CG431 Operator's Manual page 55

5
Lower Limit
5116M-0505-020E
5116M-0505-030E
5116M-0505-040E
Maintenance
Upper Limit
Level Gauge
Oil Filler Cap
Drain Plug
4. Visually check oil level. If it is below lower
limit, fill.
5. Visually inspect the condition of oil. If it is
dirty or its viscousity is not right, change oil.
6. Install oil level gauge.
7. Close top cover.
Filling
1. Open top cover and hold it securely in place
with prop.
2. Undo and remove oil filler cap.
3. Fill specified oil into filler.
4. Check oil lever.
5. Replace oil filler cap.
6. Close top cover.
Changing
1. Have an appropriate oil drain pan.
2. Open top cover and hold it securely in place
with prop.
3. Remove filler cap.
4. Remove drain plug to drain oil.
5. Clean drain plug and put it back in place and
tighten it securely.
6. Fill oil.
7. Check oil level.
8. Replace filler cap.
9. Close top cover.
-46-