Maintenance; Maintenance Schedule - CanyCom CG431 Operator's Manual

5

Maintenance Schedule

• Follow the scheduled maintenance as described below. Failure to do so may
result in mechanical or property damage, injury or death.
• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a
month, and a yearly inspection once a year.
• Some maintenance procedures described below may require special knowledge
or tools and instruments. Contact your CANYCOM representative to perform such
procedures.
Item
Starting
Running
Exhaust
Air
Cleaner
Fasteners

Maintenance

Description
Engine shall start easily without making any
irregular noise.
Glow plugs work correctly.
Engine speed shall be set properly at idle
and at full without load. Engine shall stay
running smoothly.
When accelerating engine, throttle lever shall
move smoothly, and engine shall accelerate
smoothly without stopping or knocking.
Warm up engine thoroughly, and observe
exhaust sound and gas from idle to fast
speed; exhaust sound shall be normal and
smoke shall not be excessive.
There shall be no leak in exhaust system or
muffler.
Air cleaner case shall not be deformed or
cracked. Case lid and connecting air hose
shall be firmly in place.
Cleaner elements shall be in good shape
without damage or excessive dust.
Bolts and nuts fastening cylinder head,
intake and exhaust manifolds shall be tightly
fastened.
* this may be skipped if there is no gas or
water leaks found in these areas.
Schedule
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
-34-
Note
Contact your CANYCOM
√ √ representative for
inspection.
√ √
√ √
Cleaning/Replacing:
Page 50
√