Operating Implement - CanyCom CG431 Operator's Manual

• Do not use this machine on an incline steeper than 30 degres.
• Always use [
• Do not turn on an incline, or machine can tip over.
• Do not work on a slippery surface.
• When working in a dusty area, clean air cleaner element twice a day. Dirty air
cleaner element results in poor starting, poor performance, or short life.
• When something is tangled to implement, stop engine immediately and remove
the tangled object. Such object causes excessive vibration or load, which
damages machine.

Operating Implement

（Irrust indicates Hay Collector Model）
5116M-0402-101E
Implement Height Lever
5116M-0403-010E
Operation
(Slow)] mode when working.
Throttle Lever
1. Move throttle lever to [
increase engine speed.
2. Use implement height lever to set the desired
cutting height.
NOTE
• Implement height lever sets the height to
which implement can be lowered.
-27-
4
(fast)] position to