CanyCom CG431 Operator's Manual page 30

OFF
Aux. Transmission Parking Brake Main Switch
HI
Drive
Start
1. Parking Brake
2. Imprement Switch
3. Safety Switch "ON"
LO
4. Start Engine
5116M-0402-070E
5116M-0402-080E
Operation
ON
Start
Implement
Translation Switch
Center
Right
Horn
STOP
Main Switch
Warning Lights
7. Turn main switch to [
start engine. Once engine starts, release key
immediately; switch will automatically return
to [ | (on)] position.
NOTE
• Avoid frequent starting. Once engine starts,
run it for a while to charge battery.
8. Make certain warning lamps (coolant temp.,
oil pressure, charge lamp) are not lit. If any
of them remain lit, refer to Troubleshooting
(page 71) and take an appropriate measure.
9. Allow engine to warm up by running it for
about 5 minutes without any load.
NOTE
• Drive machine gently in the first 40 to 50
hours of use after purchase for breaking-in.
-21-
(start)] position to
4