Fuses - CanyCom CG431 Operator's Manual

+ Terminal
5116M-0509-030E
5116M-0509-040E

Fuses

• If a fuse blows, investigate the cause and repair it before replacing.
• Always replace a fuse with the one of the correct amperage.
5116M-0509-050E
Maintenance
- Terminal
Fuse Box
1. Park machine on a level surface.
2. Remove right side cover.
3. Remove negative (-) cable from terminal.
4. Remove positive (+) cable from terminal.
5. Remove battery from machine.
6. Follow instructions in battery charger
operator's manual to charge battery.
7. When charge is complete, install battery to
machine.
8. Install right side cover.
1. Remove controls cover.
2. Open fuse box and inspect fuses.
3. If fuse is blown, replace it with a new one of
the correct amperage.
4. Close fuse box. Install controls cover.
NOTE
• Spare fuses (10A, 15A) are provided in fuse
box.
-65-
5