Drain Plug
5116M-0505-100E
5116M-0505-110E
Reservoir Tank
5116M-0505-070E
Ambient
Temperature
-10 °C (14 °F)
-15 °C (5 °F)
-20 °C (-4 °F)
-25 °C (-13 °F)
* The value for the ambient temperature
is 5°C lower than the actual minimum
temperature.
Maintenance
4.
5.
6.
7.
Filler
8.
9.
10. Allow engine to cool and open radiator filler
11. Replace radiator cap.
12. Close top cover.
Antifreeze Mixture (Reference)
Antifreeze
When this machine is shipped from the factory,
Mixture
it is filled with a mixture of 40% antifreeze and
30%
60% water. To prevent coolant from freezing, use
35%
40%
a mixture of water and antifreeze determined by
45%
the minimum temperature in the operation area
using the table on the left.
NOTE
Remove drain plug to drain coolant.
Wash inside radiator with running water.
Replace drain plug.
Fill coolant into radiator up to filler.
Change coolant in reservoir tank.
Run engine for 5 minutes to bleed air.
cap and top up with coolant.
• Antifreeze to use: Long Life Coolant (LLC).
• Use pure water to make antifreeze mixture.
-49-
5
Need help?
Do you have a question about the CG431 and is the answer not in the manual?
Questions and answers