Suction Filter - CanyCom CG431 Operator's Manual

5

Suction Filter

NOTE
• Replace suction filters when hydraulic fluid is changed.
Hose
5116M-0507-050E
Suction Filter
(Gear Pump side)
5116M-0507-060E
Maintenance
Elbow
Suction Filter
(Cutting Rotor side)
1. Drain fluid.
2. Loosen hose clamp to remove hose from
elbow.
3. Remove elbow.
4. Undo mount bolts to remove suction filter
from tank.
5. Install new suction filter.
6. Install elbow.
NOTE
• Wrap seal tape around threaded part of
elbow.
7. Install hose with hose clamp.
8. Fill fluid.
NOTE
• Visually check that there is no leak from
hose joints or elbows.
-56-