Christie DS+5K User Manual page 66

Section 3: Operation
3-40
Brightness Uniformity
Brightness Uniformity provides further refinement of displays already matched for
their primary colors and overall light output. Use Brightness Uniformity to create an
exceptionally smooth image in which no area appears brighter and/or more red, green
or blue than another. In the Brightness Uniformity menu, enable the "Uniformity
Enable" checkbox to access a multitude of adjustments for critical color light output
control in specific areas throughout the image. Your settings apply as long as the
"Uniformity Enable" checkbox is enabled and you are using a "User" color
temperature defined by the Brightness Uniformity controls. To disable the Brightness
Uniformity function, delete the "Uniformity Enable" checkmark.
NOTE: See also 3.10, Using Multiple Projectors for the complete step-by-step
procedure for achieving uniform brightness in adjacent displays.
Edge Blending
— SUBMENU
The Edge Blending submenu provides a range of controls for smoothing together the
overlapping bright edges of multiple adjacent projected images to create a single
larger "seamless" image. These controls, which primarily affect whitelevels, are
typically used in conjunction with mechanical lens blinders (optional), which are
installed on the front of the projector and which primarily affect blacklevels. NOTE:
There is a center line (both horizontal and vertical) in the Edge Blending test pattern.
The intersection of these lines is the true center of the projector's display area.
NOTE: See also 3.10, Using Multiple Projectors.
Color Adjustments by X/Y, and Color Saturation —
NOTES: 1) For defining or changing a User 1, 2, 3, or 4 color performance or
"gamut". Sometimes known as Comprehensive Color Adjustment™. 2) Factory-
defined primary color levels, which ensure a specific color performance from
projector-to-projector, can be calibrated in the Service menu only. If you suspect
alteration of these defaults, the factory settings can be recovered with selection of
"Reset to Factory Defaults?" in the Color Primary Settings submenu accessed via
the Service menu (password-protected).
From the factory, the projector can utilize
any of the 3 pre-defined color performance
settings identified at right (default=Max
Drives), or colors can be driven on the
basis of color temperature. For most
applications, one of these gamuts will
produce accurate and realistic colors from
a variety of sources. They can be applied at
any time in the Advanced Image Settings
menu ("Select Color Adjustment"), and are
not adjustable.
Figure 3.19. Keystone Adjustment
— SUBMENU
Figure 3.20. Color Gamut Choices
User's Manual
SUBMENUS