Christie DS+5K User Manual page 87

Show Blending Overlap
defined blend width area to solid
gray so that two adjacent images can
be seamlessly aligned simply by
overlapping their gray bars, if
needed. Toggle the Show Blending
Overlap off to reactivate the blend
effect. NOTE: Blending Overlap
appears as Reserved when
ChristieTWIST is installed.
Other Functions
For convenience, the Edge Blending
submenu also includes related options for
enabling a specific color and/or test pattern,
or for working with colors or the lamp. Such
functions duplicate those provided elsewhere
in the menu system.
Edge Blending Procedure
NOTE: Before attempting to work with edge blending software functions, you must 1)
physically align the projectors/images by correctly overlapping the displays from your
intended external source, and 2) Match colors and Brightness Uniformity.
For a shared edge, all Blend procedures and settings
should be identical on BOTH projectors.
1. Start with 2 projectors. Display full white field test pattern from both.
2. In the Edge Blending submenu, enable Edge Blending by entering a checkmark in
the top checkbox.
3.
SET STARTING POINTS FOR ADJUSTMENT
Set all blend widths to 0.
Go to "More" and set everything in the Edge Blending (2) menu to 50.
turns your
IMPORTANT
:
Section 3: Operation
User's Manual 3-61
.