Christie DS+5K User Manual page 49

Section 3: Operation
H-Position
This option moves the image right or left within the area of available pixels.
NOTE: The value shown represents where the approximate center of the image lies in
relation to the total number of pixels available horizontally. This varies widely
according to the signal—watch the image while adjusting.
V-Position
This option moves the image up or down within the area of available pixels.
NOTE: The value shown represents where the approximate center of the image lies in
relation to the total number of pixels available vertically. This varies widely
according to the signal—watch the image while adjusting.
Advanced Size and Position
— SUBMENU
This submenu consists of the following options:
This read-
ACTIVE INPUT WINDOW:
only value indicates the current size
(i.e., area) of your displayed data or
"region of interest" as defined by
the blanking controls. By default,
the projector automatically
determines what portion of its full
resolution to use, and pixels in the
surrounding borders are turned off.
You can also specify a specific
active input window size by
adjusting one or more "Blank"
settings. For example, if you have blanked (cropped) 100 pixels from both the left and
right edges of an incoming source of 1400 x 1050, the remaining active input window
will be reduced to 1200 x 1050. When using SD or HD or a decoded video source at
or , the default blanking of "0" defines an active input window of 720
INPUT 3 INPUT 4
x 483.
User's Manual 3-23
.