Appendix F: Optional Input Modules
RGB400 Active Loop-Thru
Input Module
38-804607-xx
PC250 Analog
Input Module
38-804609-xx
F-2
'
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input
signals from computers or other RGB source devices. Video inputs are 75
terminated. Video outputs provide buffered loop-through to another display device.
RGB400ALT Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
◊
buffered loop-through video outputs
NOTE: The audio connectors are not functional.
'
The PC250 Analog Input Module may be installed in this projector, a Marquee Signal
Switcher or a Marquee Case/Power Supply. The module receives analog RGB input
signals from IBM PC compatibles or Macintosh computers. Video inputs are 75
terminated. Video outputs are provided for buffered loop-through to another display
device.
PC250 Analog Features
◊
accepts VGA or MAC RGB video
◊
15 pin D connectors for video
◊
active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2)
The audio connectors are not functional. 3) Trademarks are the rights of their
respective owners.
User's Manual
Ω
Ω