Christie DS+5K User Manual page 80

Section 3: Operation
3-54
Figure 3.27. Jot Down a Set of "Max Drives" X/Y Values
5. In each projector, select a "User" color adjustment (1-4) to enable Color
Adjustments by X,Y changes. Then enter your recorded x/y values into each menu
(Figure 3.28).
Figure 3.28. Copy X/Y Values into All Projectors
6. In each projector, judge by eye and adjust x/y coordinates slightly in the following
manner:
To match reds, decrease "Red
X" until full field red screens
match.
To match greens, decrease
"Green Y" until full field
green screens match.
To match blues, increase both
"Blue X" and "Blue Y" until
full field blue screens match.
NOTE: For speed, enable the "Auto
Color Enable" checkbox. Each color
User's Manual