Christie DS+5K User Manual page 38

Section 3: Operation
3-12
Once selected, change the setting as desired (see below) and press
return to the current function menu.
Slidebars in menus – The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slidebar
icon (adjustment window). This number often expresses a percentage, or it may have
units associated with it (such as pixels, degrees Kelvin, etc.), depending on the
specific option. Press
number and the length of the bar change accordingly. Hold for continuous adjustment.
Or press to activate a slidebar text box for specific number entry via the keypad,
then press to save (or press
For quick access, you can access Gamma, Brightness, and
"Direct" slidebars -
Contrast slidebars without traveling the menu system. For example, simply press
to immediately display the same contrast slidebar accessed with the Contrast option in
the Image Settings menu.
Use the arrow keys to adjust a direct slidebar, or press
number from the keypad , then
you are done, press
Exit
NOTES: 1) You can still adjust a direct slidebar as usual if the display is turned off
(see or Menu Preferences menu) — the slidebar just won't be visible. 2) A direct
OSD
slidebar disappears if it is not used within 5 seconds.
Conditions are present if its adjacent
Checkboxes -
checkbox contains a checkmark. To toggle the checkbox,
simply highlight and press
to check and to uncheck. If a checkbox is numbered, simply enter its number to
immediately toggle the checkbox.
Pull-down lists – To see a pull-down list of options available for a given parameter
labeled with a , you can:
•
Highlight it and press
•
Or enter the menu option number.
Use or keys to navigate up and down within the list (the current choice is
noted with a small ' ). Press
Figure 3.7. Example of Pull-Down List
to gradually adjust the setting up or down—both the
to cancel).
Exit
or or
to save and return to your presentation.
, or highlight and use
(Enter)
to choose an option from the list, if desired.
User's Manual
to save and
and enter a specific
to save (or to cancel). When
Exit
Cont