Christie DS+5K User Manual page 34

Section 3: Operation
3-8
OSD (On-screen display)
OSD
OSD
Press to hide the projector's menu system during use. To see the menus
again, do one of the following:
• Press and hold
• Press and release
• Press
OSD
Invisible menus are fully functional, enabling "hidden" access to numbered features
and image adjustments by entering the corresponding sequence of keypresses on the
keypad.
NOTES: 1) With OSD "on", you can still hide error messages and slidebars by
disabling these options in the Menu Preferences menu.
Shutter
Shutter
Shutter
Press and hold
closed or open with a single keystroke. Or press and release
immediately by
you are unsure of the present state). Alternatively, press
present on/off state. A closed shutter blanks the display (turns it to black). Close the
shutter to mute all display while maintaining access to projector functions. Opening
the shutter restores the image.
NOTES: 1) The status display shows "5H", when the shutter is closed. 2) The shutter
is open upon power-up.
Function Key
Func
IF WITHIN A MENU:
with the appropriate topic elsewhere in Section 3. For example, press
Channel Setup menu to enable deletion or copying of a channel.
IF WITHIN A PRESENTATION:
digit number to enable a specific color or colors in the
display (see right). For example,
only red and green data,
data. Eliminating one or more colors can help with certain
diagnostics and setups, such as when accurately overlaying
one image on top of another from stacked projectors.
NOTE: Color enabling can also be implemented from numerous locations within the
menu system.
Projector
Proj
Proj
Press to access a specific projector within a group of projectors or to confirm if
the local projector is listening. The number in the "Enter Number" window indicates
which projector is currently listening to commands, and will match the projector
number that has been defined in the Menu Preferences menu.
The "Projector" checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
OSD
for two seconds
OSD
followed immediately by
OSD
for two seconds to toggle the internal mechanical shutter blade
(closed) or (open) to guarantee the correct toggle (useful if
Func
Using the for special tasks within the menu system is noted
Func
Press followed by a 2-
6
Func
6 7
Func
will display all color
User's Manual
Shutter
followed
to toggle from the
Shutter Shutter
4
will display
in the
Func