5-2
1. Using the Facsimile
Basic Faxing Procedures
Quick Memory Transmission is the most basic faxing procedure you will use. ☞p.5-4
Place the original in position (step 2), set for image quality, contrast, and reduction (steps 3 to 5), specify
the destination (step 6), and press the Start key (step 7). This will allow you to send the document by
facsimile.
The appropriate selections
your document in better conditions according to the specific characteristics of the document and
receiving machine.
1.
Press the Fax/Scan key to display the Fax screen.
* The Auto-Mode Screen may be used for Quick Memory Transmission.
2.
Place the document.
Load the document in the
Document Feeder. ☞p.2-27
• Selecting Quality according to the
original
• Selecting Contrast according to
the original
• Selecting Reduction/Areas
according to the paper size on the
receiving end.
you make on the Touch Panel ensure that the other party will receive
4015O247CA
Raise the Original Cover and place the document
face down on the Original Glass. ☞p.2-30
1166O038AB
Selecting Quality & Reduction.
3. Touch [Quality]. ☞p.5-9
4. Touch [Contrast]. ☞p.5-10
5. Touch [Reduction/Areas].
☞p.5-12, 5-14
4016P251CA
1166O042AC
4016P252CA