Minolta Di200f Operator's Manual page 357

10-44
11. When This Type of Copy is Produced
Symptom
The copy is blurry.
1074O110
The copy has lines.
1139O1670A
The copy has dark specks or
spots.
1074O111
The edge of the copy is
dirty.
1074O112
Possible Cause
The paper is damp.
The Original Glass surface is dirty. Wipe the Original Glass clean with
The Original Pad or Document
Transport Belt is dirty.
The original is very thin or highly
transparent.
The original is 2-sided.
The Original Pad is dirty.
You have selected a paper size
larger than the original.
(When the zoom ratio is set at full
size ×1.000)
The original is not placed in the
correct position.
(When the zoom ratio is set at full
size ×1.000)
The reduction ratio selected is not
in accord with the paper size.
(When doing manual reduction
copying.)
Action
Change the paper. ☞p.10-2
a soft dry cloth. ☞p.11-10
Wipe the Original Pad clean with a
soft cloth dampened with alcohol.
☞p.11-11
Place a blank sheet of paper over
the original. ☞p.2-31
The information on the back side of
a 2-sided, thin original may be
slightly reproduced on the copy. Set
the machine into the Manual
Exposure mode and, using
[Lighter], make the exposure level
lighter. ☞p.3-42
Wipe the Original Pad clean with a
soft cloth dampened with alcohol.
☞p.11-11
Select the same paper size as the
original. ☞p.3-5
Or, use Auto Size to enlarge the
copy to the appropriate size.
☞p.3-12
Select the same paper size as the
original. Or, reload the paper in the
same direction as the original.
☞p.3-5
Select the zoom ratio according to
the paper size. ☞p.3-12
Or, use Auto Size to reduce the
copy to the appropriate size.
☞p.3-12