Placing The Original On The Glass - Minolta Di200f Operator's Manual

2-30
5. Placing the Original

Placing the Original on the Glass

Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using a document feeder, see ☞p.2-26.
NOTES
• If you place your original directly on the Original Glass, place it in the direction illustrated below.
• If you need to place your original in a direction different from these examples, set "Original
Direction" on the Touch Panel.☞p.3-35
• The machine may fail to read the areas of 1/2 inch margins on top, bottom, right, and left edges of the
original if it is to be sent by facsimile.
Sheet Originals
<Using plain paper or types of originals not
suitable for the document feeder>
1
Raise the Original Cover (document feeder)
and place the original face down on the
Original Glass.
4015O047AB
4015O267EA
2
Position the original in the right rear corner
with the marker on the scale.
3
Gently lower the Original Cover.
NOTE
To send a facsimile, place the original so that its
shorter side is placed against the Original Width
1166O027AA
Scale on the right. If the original is placed with
its longer side against the Original Width Scale,
the receiving party may receive it in a reduced
size.
4015O048AB
Original Scales
1166O192AA