Minolta Di200f Operator's Manual page 90

<When Finisher FN-110 or Mailbin Finisher is
mounted>
1
Touch the desired finishing function key.
2
Touch [Corner Staple].
With Corner Staple, the staple is driven into the
copies at the location shown below:
Paper size : 11×17 L to Letter
Type of paper : Plain paper,
A
No. of sheets to be stapled together:
Mailbin Finisher : 2 to 50
4015O001AA
Finisher
NOTES
• When [Corner Staple] is touched with Non-Sort
• Stapling is not possible in the Interrupt mode.
• Stapling position cannot be specified if the
• Check the correct direction of the originals
4016P033CA
• If an original is placed directly on the Original
• Make sure that the maximum number of sheets
4016P034CA
recycled paper
: 2 to 30
4. Selecting the Finishing Function
selected, the Finisher is automatically set into
the Sort mode.
machine is equipped with a Finisher FN-110 or
Mailbin Finisher. When a Mailbin Finisher is
mounted, however, stapling position can be
specified if the function is combined with Hole
Punch.
when making copies in the Staple mode.
☞p.3-26
Glass in a Staple mode, Separate Scan is
automatically set.☞p.3-61
to be stapled together is not exceeded when
making copies in the Staple mode.
3-23