Minolta Di200f Operator's Manual page 324

3
Sharply tap the new Toner Bottle against a
desk or other hard surface four to five times.
Then turn the Toner Bottle upside down and
tap it the same way again.
4
Shake the new Toner Bottle well and turn it
over lengthwise five times.
NOTE
To prevent toner caking, make sure to carry out
the procedure above to agitate the toner well
before installing the Toner Bottle.
5
With the Seal on the Toner Bottle facing up,
slowly peel off the Seal as illustrated.
NOTE
Be careful, some toner may puff out from the
bottle.
2. When the Message "Please add toner." Appears
6
With the "UP" marking on top, insert and
push the bottle into position.
1166O228AA
NOTE
Push the bottle in up to the black line.
7
Close the Toner Bottle Cover.
1166O095AA
NOTES
• Use ONLY the specified toner for this machine.
Using any other toner could result in trouble.
• Do not throw away, but keep, the used Toner
Bottle, which will be collected by your Tech.
Rep.
• Be careful not to drop the Toner Bottle from 40
inch or more height. It may damage the Toner
Bottle.
• When the Toner Bottle Cover is closed, the
machine automatically starts replenishing the
supply of toner. During this period, do not
1139O1390A
attempt to turn OFF the Power Switch or open
the Right Door.
Toner Replenisher
Use the Toner Replenisher function available
from the Utility Mode if the image is light
immediately after the Toner Bottle has been
replaced with a new one. ☞p.7-19
10-11
4015O112AC
4015O113AB